Frameless Components Frameless Components

Each Frameless Kit comes with the following components:

1 – Protective Sleeve

1 – Wall Mount

1 – Center Connector

1 – Spacing Bracket

4 – Horizontal Connection Rods

4 – Vertical Connection Rods

2 – Nails

6 – Clear Flap Stickers

4 – Sleeve Clips

Protective Sleeve

Made of archival safe plastic, the Protective Sleeve is cut to fit perfectly over your artwork, photo, or comic. The flaps fold over the sides and hold the display in place, while also allowing for the mounting system to be connected to it. The plastic for the Protective Sleeve is durable, and the flaps can be opened and closed without the risk of tearing the plastic.

Wall Mount

Universal for all Frameless Kits, the Wall Mount features an angled nail slot at the top, which assists with leveling, as well as a curved slit for a secondary nail at the bottom. The curved slit has an optional groove that the nail can be installed in to lock the position of the Wall Mount for those who want to precisely level the kits themselves.

Center Connector

The Center Connector connects to the eight Connections Rods at the very center of the Frameless Kit, keeping the weight of the Kit level on the wall.

Sleeve Clip

Four Sleeve Clips are included in the kit, and they attach to all four flaps of the Protective Sleeve, without the need for an adhesive. The Sleeve Clips connect to the very center of the flaps to ensure that the Frameless Kit is always balanced.

Spacing Bracket

The Spacing Bracket spaces the Frameless Kit one increment of depth away from the wall. Multiple Spacing Brackets can be attached to each other for additional increments of depth.

Connection Rods

The Connection Rods connect the Center Connector to the Sleeve Clips, and provide support for the kit, keeping it flat and parallel to the wall.

Nails

Each Frameless Kit comes with two 16 gauge, 1” nails. One nail for the top, angled slot, and the second nail for the bottom, curved slit. The bottom nail can be inserted into the curved slit to allow the Frameless Kit to self level, or the groove below it for more precise mounting.

Clear Flap Stickers
>

Six Clear Stickers are included with each Frameless Kit, and they can be applied to the corners of the flaps for those who wish to keep the Protective Sleeve over the Frameless Kit for a longer period of time. The Clear Stickers can be pulled off the flaps when one artwork is swapped out for another, and resealed multiple times before needing to replace the sticker with a new one.

Each Frameless Kit comes with the following components:

1 – Protective Sleeve

1 – Wall Mount

1 – Center Connector

1 – Spacing Bracket

4 – Horizontal Connection Rods

4 – Vertical Connection Rods

2 – Nails

6 – Clear Flap Stickers

4 – Sleeve Clips

Protective Sleeve

Made of archival safe plastic, the Protective Sleeve is cut to fit perfectly over your artwork, photo, or comic. The flaps fold over the sides and hold the display in place, while also allowing for the mounting system to be connected to it. The plastic for the Protective Sleeve is durable, and the flaps can be opened and closed without the risk of tearing the plastic.

Wall Mount

Universal for all Frameless Kits, the Wall Mount features an angled nail slot at the top, which assists with leveling, as well as a curved slit for a secondary nail at the bottom. The curved slit has an optional groove that the nail can be installed in to lock the position of the Wall Mount for those who want to precisely level the kits themselves.

Center Connector

The Center Connector connects to the eight Connections Rods at the very center of the Frameless Kit, keeping the weight of the Kit level on the wall.

Sleeve Clip

Four Sleeve Clips are included in the kit, and they attach to all four flaps of the Protective Sleeve, without the need for an adhesive. The Sleeve Clips connect to the very center of the flaps to ensure that the Frameless Kit is always balanced.

Spacing Bracket

The Spacing Bracket spaces the Frameless Kit one increment of depth away from the wall. Multiple Spacing Brackets can be attached to each other for additional increments of depth.

Connection Rods

The Connection Rods connect the Center Connector to the Sleeve Clips, and provide support for the kit, keeping it flat and parallel to the wall.

Nails

Each Frameless Kit comes with two 16 gauge, 1” nails. One nail for the top, angled slot, and the second nail for the bottom, curved slit. The bottom nail can be inserted into the curved slit to allow the Frameless Kit to self level, or the groove below it for more precise mounting.

Clear Flap Stickers
>

Six Clear Stickers are included with each Frameless Kit, and they can be applied to the corners of the flaps for those who wish to keep the Protective Sleeve over the Frameless Kit for a longer period of time. The Clear Stickers can be pulled off the flaps when one artwork is swapped out for another, and resealed multiple times before needing to replace the sticker with a new one.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page